Datalogic Scanning FALCON 4400 SERIES - Manual (Page 75)

Falcon Desktop Utility
Product Reference Guide B-3
6. Specify the group name or use the default, then click Next , then Next
again to install the files on your PC.
7. Check the “Install FDU via ActiveSync when finished” checkbox,
then click Finish .
ActiveSync will launch automatically and display a dialog directing to you to
follow instructions on your Falcon to finish the installation.
8. On your Falcon, verify that the installation succeeds, then tap Restart .
9. On your PC, click OK to verify that you have followed the instruc-
tions on your Falcon.
Once FDU has been installed in ActiveSync, you can install FDU on addi-
tional docked Falcons as follows:
1. Place the Falcon in the Dock and connect to ActiveSync.
2. Select Add/Remove Programs from the Tools menu in the ActiveSync
window.
3. Check the Falcon Desktop Utility checkbox in the list, then click OK .
4. On your Falcon, verify that the installation succeeds, then tap Restart .
5. On your PC, click OK to verify that you have followed the instruc-
tions on your Falcon.
Installation on wireless Falcons via FMU
1. Click the FDU link on the Product CD to launch the installer.
2. Click Next .
3. Read and agree to the End User License Agreement and the Microsoft
Addendum to the EULA by clicking “I Agree to the Terms Specified
in the License Agreement”, then click
Next .
4. Specify the destination folder for this installation, or accept the
default and click Next .
5. Specify the group name or use the default, then click Next , then Next
again to install the files on your PC.
6. Ensure the “Install FDU via ActiveSync when finished” checkbox is
not checked, then click Finish .
FMU is required to support wireless installation. You must have already installed
FMU on your server. Please see the FMU User’s Guide on your Product CD for
information on installing and using FMU.