Datalogic Scanning FALCON 4400 SERIES - Manual (Page 130)

Programming Parameters
E-34 Falcon ® 4400 Series with Windows Mobile ®
Table E-5. Other Controls
Imaging
Gamma Cor-
rection
Specifies the amount of correction the
imager applies when taking images.
Gamma correction attempts to match the
way the imager responds to light levels to
that of the human eye.
0
C
2
B 0 (none),
1 to 99
(less to
more)
0 0 0
Code Parameter/ Description
I.
D.
#
Accep-
table
Input
Defaults
Min Max Factory
Code Parameter/ Description
I.
D.
#
Acceptable
Input
Defaults
Min Max Factory
Other Controls
Enter 1 for On and 0 for Off.
Enable Label
Programming Enables/disables the ability to perform
label programming.
F
F
0
0
On or Off On On On
Beeper Volume Adjusts the beeper volume.
F
F
2
0
00 = Off
00 - 09
(01 = Lowest;
07 = Highest;
08 = Higher;
09 = Lower)
07 07 07
Long Range
Trigger Mode
Selects the Long Range Trigger mode.
0
0
0
0
On = Release
Scan Off =
Spot Timeout
Off Off Off
Spotting Beam
Enable
Enables/disables the Spotting Beam
0
0
0
1
On or Off On On On