Datalogic Scanning FALCON 4400 SERIES - Manual (Page 80)

Falcon® Desktop Utility
B-8 Falcon ® 4400 Series with Windows Mobile ®
This dialog box will only open if a password was defined.
Figure B-4. Setting a Password
Table B-3. Setting a Password
Complete the Falcon Config Admin dialog:
1. Enter your password using either the keypad on the unit, or using the
stylus on the on-screen keyboard.
If you enter an incorrect password, the system will prompt you to
input the correct one.
2. Tap OK to verify the password.
Command Description
Enter Password
Enter your password using the keypad, or using the stylus on the soft
input panel
( SIP ) in the text box.
OK Tap the OK button to accept the password.
X Select/tap the X button to cancel the specified Hot Key.