Datalogic Scanning FALCON 4400 SERIES - Manual (Page 19)

Settings
Product Reference Guide 2-5
Figure 2-2. Backlight Settings
4. Exit and save your modifications by tapping OK, or press on
the keypad.
Decoding
You can configure the Falcon’s decoding options by tapping > Settings >
System > Decoding . Decoder configuration can also be accomplished for large
numbers of terminals using FMU (Falcon Management Utility).
There are two sections in the Decoding control panel, each containing addi-
tional pages. There are six General Configuration pages and multiple Bar
Code symbology pages.
Configuration Control Panels
Select the desired configuration from the following options shown in Figure 2-
3 , and the other Decoding Properties figures on the following pages.
Using Auto-on while running from battery power will cause the battery pack to
discharge at a faster rate. The battery discharge rate decreases with a decrease in
backlight usage.
Other decoding parameters are described in Programming Parameters, starting
on page E-1; bar code settings are provided in Programming Bar Codes, starting
on page F-1.