Besa Lighting Bolla (120V Pendants) - Manual (Page 2)

FIXTURE INSTALLATION GUIDE
All electrical connections and the installation of this fixture must be in agreement with local codes,
ordinances or the NEC (National Electric Code) or CEC (Canadian Electrical Code).
Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
Model T31T (1 Light Flat Canopy 120V)
T31T, Rev.6 3-09
6695 Taylor Rd. Blacklick, OH 43004
www.besalighting.com
Using a Continuity Tester or Multimeter,
confirm the following connections:
• Clear Conductor with White Stripe (Neutral/White)
is connected to the Socket Screwshell. This wire is
to be connected to house supply white conductor.
• Clear Conductor (Hot/Black) is connected
to the Socket Center Contact. This wire is
to be connected to house supply black wire.
SOCKET
SCREWSHELL
SOCKET
CENTER CONTACT
POLARITY INSTRUCTIONS
8. Restore power.
6. Lift the canopy up to the ceiling and tighten
with the Retainer, but do not overtighten.
NOTE:
Overtightening can cause the Retainer
to be difficult to unscrew. If this occurs,
usually rotating the canopy counter-
clockwise will help to unlock the Retainer.
7. Proceed to the GLASS SHADE INSTALLATION GUIDE.