Belshaw Adamatic Mark II-Gas Donut Robot - Manual (Page 3)

If you accept the machine from the shipping
company, you are, in effect, saying that the
machine is in good condition, and you must
pay for the machine. Belshaw cannot pay for
shipping damage, because the freight company
has accepted the machine from Belshaw in good
condition, and is responsible for its safe delivery.
For your protection, inspect the machine to see
that no parts are bent, scratched, or otherwise
damaged. If any damage has occurred in
shipping, file a freight claim with the shipping
company immediately.
IMPORTANT
Keep this manual for future reference.
To unpack the Donut Robot
®
Mark II-Gas and
transport it to the workstation requires two
people:
1. Remove the foam and other packing
materials from the two boxes.
2. Carry the hopper, plunger, and swing
column to the work station.
3. Coil the cutter head power cord and carry
the cutter head to the work station.
4. Carry the conveyor assembly the work
station.
5. Move the fryer to the workstation.
EQUIPMENT RECORD
Please provide the information below when you correspond with us about your machine.
Purchased by ______________________________________________________________________
Installed by _______________________________________________________________________
Date of installation __________________________ Model number _________________________
Serial number ______________________________________________________________________
092308
MN-1017EN
Belshaw Bros., Inc.
814 44 TH ST NW Suite 103
Auburn, WA 98001 USA
Phone: 206-322-5474 • Fax: 206-322-5425
Email: [email protected] • http://www.belshaw.com