Beisler 1265-4 - Manual (Page 96)

D-33
Programming Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
D.3
Programming
1. Insert the memory card into the slot on the operating panel.
2. Select the programming menus:
• Press the ( key.
3. Select the MEMORY CARD function:
• Press the b key.
4. To overwrite the selected seam shown on the display, select the
CARD – > CURRENT SEAM function:
• Press the b key.
or
5. To overwrite all sewing programs, select the CARD – > ALL VA-
RIABLES function:
• Press the d key.
6. Confirm the selection:
• Press the % key.
7. The display shows *O.K. PLEASE WAIT* until the data transmission
has been completed.