Beisler 1265-4 - Manual (Page 80)

D-17
Programming Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
D.3
Programming
44 PULLER SWINGING
Only required for inseam
Enable function = 01
Disable function = 00
u Settings for the sewing head
The settings determine the sewing behavior of the sewing unit.
01 SLOW SEWING SPEED
Rotational speed at reduced sewing speed during start distance (see
parameter 03)
02 FAST SEWING SPEED
Rotational speed at normal sewing speed
03 SLOW SEWING STITCHES
Distance of the slow sewing start
05 CONTOUR GUIDE UP
Sewing distance traveled at sewing start before the contour guide is
lowered
06 TILL TABLE BLOWING ON
Sewing distance traveled at sewing start before the worktable
nozzles are supplied with compressed air
07 DURATION TABLE BLOWING [70]
Distance along which the compressed air transports a sewing piece
09 REDUCED SPEED
Reduced sewing head speed that is enabled using the function
SLOW for difficult sewing sections (S1-S5) (point of reference: pho-
tocell 13)
Activating the stacker manually
The stacker can be activated manually, independent of the automatic
machine operation.
• Press the g key.
S