Programming – Beisler 1265-4 User Manual
Page 86

D-23
Programming Instructions Automatic Single-Head Serging Machine 1265-4
Beisler GmbH
D.3
Programming
1. To move up or down in the parameter list:
Press the § or $ key.
2. Activate the parameter input field:
Press the % key.
3. Modify the value:
Press the & or / key,
or enter a two-digit or three-digit value using the numeric keypad. In-
put sequence: Hundreds digit, tens digit, units digit.
4. Confirm input:
Press the ( key.
5. Exit menu and return to access level 2:
Press the ( key.
Setting the start mode
There are two ways for setting the start mode of the sewing process:
;
Start by photocell (automatic sewing process)
:
Start with footpedal
1. To change the start mode:
:
Press the d key.
2. To return to access level 2 :
Press the ( key.