Beisler 1265-4 - Manual (Page 85)

D-22
Programming Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
D.3
Programming
4. Confirm change:
• Press the ( key.
The display shows the seam number in the seam sequence.
Preseams
The B / C machine can be set for processing the preseams (waist
seam, inseam and hem seam). This settings are effective only if the
preseams are enabled.
Selecting the preseam parameter list:
"
• Press the c key
1. PRESEAM SPEED
Sewing speed
PRESEAM TOP FEEDING
Basic setting for fullness
PRESEAM DIFFERENTIAL
Basic setting for fullness
TIL ROLLER DOWN
Length (in cm) til roller down,
(max. value=99 cm)
2. PRESEAM SPEED
Sewing speed
PRESEAM TOP FEEDING
Basic setting for fullness
PRESEAM DIFFERENTIAL
Basic setting for fullness
TIL ROLLER DOWN
Length (in cm) til roller down,
(max. value=99 cm)
3. PRESEAM SPEED
Sewing speed
PRESEAM TOP FEEDING
Basic setting for fullness
PRESEAM DIFFERENTIAL
Basic setting for fullness
TIL ROLLER DOWN
Length (in cm) til roller down,
(max. value=99 cm)