Beisler 1265-4 - Manual (Page 73)

D-10
Programming Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
D.3
Programming
3. To move up or down in the parameter list:
• Press the § or $ key.
The input field for the parameter appears on a black background.
4. Modify the value:
• Press the & or / key,
or enter a two-digit or three-digit value using the numeric keypad. In-
put sequence: Hundreds digit, tens digit, units digit.
5. Confirm input and exit menu:
• Press the ( key.
Enabling or disabling sewing functions or machine functions:
For specific sewing patterns or as the result of a specific material beha-
vior, all six functions can be enabled or disabled individually or in com-
binations.
1. Select the function:
• Press the c key,
s
until the symbol assigned to the input field appears on a black back-
ground.
2. Move to the basic parameter menu of the selected function:
• Press the % key.
3. Enable or disable the function:
• Press the h key.
4. Confirm input:
• Press the ( key.
Fig. 4: Use the F8 key 4 to enable or disable the Puller
function 3 for the inseam 2 of seam No. 6 1.
When this program function is selected, the parameter list
assigned to this specific sewing function 5 is opened.
Fig. 4