Beisler 1265-4 - Manual (Page 24)

Operating Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
B-14
B.2
Functions of the machine
B.2.10 Sewing programs
The program control memory can store up to 20 sewing programs (M 01-
M 20). Up to 7 seams with corresponding seam numbers 3 can be as-
signed to each sewing program 2. The seams differ by the control pa-
rameters that are assigned to them by their sewing program and by the
control functions that are enabled.
Fig. 14: The display shows the structure of the selected sewing program.
Example: Sewing program M01. This sewing program controls the sewing
of the inseam with the knee lining on top. The trousers panel
is lined up at the waistband side, the sewing process is star-
ted using the photocell installed at the sewing head.
1 Sewing program image
2 Description of the sewing program
(a sewing program may consist of several seams)
3 Seam number of the sewing program
4 Symbols of the activated sewing functions
5 Day counter for completed seams
6 Symbols of the deactivated sewing functions
Preseams:
Hem seams, fly seams, and hem seams can be serged sepa-
rately.
The characteristics of the preseams are set in a separate pa-
rameters list. These settings are used only if the sewing pro-
gram for preseams is activated.
Inseams and side seams:
Inseams and side seams can either be serged in individual, separate se-
wing processes or effected as a combined sewing process with alterna-
ting seams.
In this case, the corresponding preprogrammed seams are enabled in quick
access at the operating panel.
Creating identical stitch images:
If identical stitch images are required for inseams and side seams, the knee
lining must always be lined up in the same position (always top or always
bottom). In this case, the trousers panel is lined up alternatingly flush with
the waistband and flush with the hem.
Fig. 14