Beisler 1265-4 - Manual (Page 77)

D-14
Programming Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
D.3
Programming
Section:
1. Select the function:
• Press the c key,
s
until the symbol assigned to the input field appears on a black back-
ground.
2. Move to the basic parameter menu of the selected function:
• Press the % key.
3. Activate/deactivate individual sections:
• Press the c to g key.
4. Confirm input and exit menu:
• Press the ( key.
Setting fullness (quantity) and length (cm) of the section:
The individual input fields are scrolled from left to right.
1. Activate / deactivate input field:
• Press the $ or § key.
2. Modify the value:
• Press the & or / key.
or enter the two-digit value using the numeric keypad. Input se-
quence: Tens digit, units digit.
3. Confirm input and exit menu:
• Press the ( key.
# Puller speed
The photocell determines the deviation of the fabric contour from the
ideal routing and adjusts the puller speed accordingly, if required.
• If the sewing pieces are shifted sideways away from the stop, the
puller speed is too high,
• if the sewing pieces warp at the stop, the puller speed is too low.
14 PULLER SPEED
Major parameter / basic setting for speed
15 PULLER FASTER
Speed increase if sewing piece warps at stop