Avery Dennison Rewinder - Manual (Page 27)

Manual Rewind Option
06/01 Rev. 2.09 27
Adjustment peripherial board
30 mA
Z0131.cdr
P1
CN 5 touch down
home sensor
Poti R 41 label present sensor
CN 3 infrared sensor
JP 2 signal / power
connecting to dispenser
Additional
information – this
board can be used
for:
- applicator
option
- cutter option
- rewinder option
- infeed option
- cutter / stacker
option
CN 6 test point
CN 4 main stepper connector
Depending on the mounted option – this sensor is used in
different ways :
-
cutter / stacker no adjustment necessary
- cutter no adjustment necessary
- infeed use Poti P1 to adjust the sensor
- rewinder set current to 30 mA by use of P1 with
unplugged sensor as illustrated.
- for label present sensor (manual application) use
Poti R 41 to adjust between test point CN 6 and
ground a value of 2.5 Volt (no media in and cover
closed)
Poti P 1 infrared sensor
CN5 signals :
touch down – digital signal
that the applicator base
plate get in contact with the
surface of He product !
Applicator moves back.
Peripherial board 99054