Avery Dennison Rewinder - Manual (Page 10)

Manual Rewind Option
06/01 Rev. 2.09 10
Media guiding
The media guiding of the rewind option is used to control the movement of the media before
the media is rewound. Otherwise the media will run outside or inside on the rewind core.
Assembly/Disassembly/Adjustment media guiding
• the roll can be disassembled complete
from the dancer arm (together with
the guiding rings)
• open the lock washer as shown on the
picture
• the roll can be removed from the axle
• sometimes it is possible that the roll has
collected glue or dust - then it is
necessary to clean the roll
• the plastic bearing can be replaced as well
if it is necessary
• the guiding rings can be adjusted by
moving the rings on the roll
• the roll is fixed to the lower position as
well with a lock washer
Tooling
screw driver small
Sicherungsring