Avery Dennison Rewinder - Manual (Page 19)

Manual Rewind Option
06/01 Rev. 2.09 19
Dancer arm
The dancer arm is a very important part - controlling more then one mission. First of all the
dancer arm is controlling that the media is always rolled up with the same friction. Second
the media is controlled and guided to the right position - the speed of the stepper motor is as
well controlled by the dancer arm.
Attention: It is clear that the dancer arm is very important for the correct
function of the unit. Never use the dancer to move the unit
or to carry it!
Assembly/Disassembly dancer arm
• remove roll profile and guiding disc
(see roll profile and guiding disc)
• open the two hexagonal socket
screws
• the gear plate can be removed
• remove lock washer from axle
• pressure spring and wedge can be
removed
• remove the second lock washer
from the axle - the axle can be
removed
Tooling
screw driver small
hexagonal socket SW 3
Attention: The dancer arm is an assembly and can not be disassembled!