Avery Dennison Rewinder - Manual (Page 12)

Manual Rewind Option
06/01 Rev. 2.09 12
Guiding disc
The guiding disc is used to control the movement of the rewound material during rewind
operation. The covered part of the guiding disc is as well the transport part (a gear wheel is
part of the disc). Fixed with a lock washer to the axle - the guiding disc shows two holes for
the roll profile to fix it there.
Assembly / Disassembly guiding disc
• before disassembling the disc - the
tooth belt should be relived (see tooth belt)
• after removing the lock washer the disc
can be removed
• now you can reach the tooth belt - the
tooth belt tighten part and the gear of
the stepper motor
• as well the sensor - the sensor, sensor
wedge, dancer arm spring can be
watched
Tooling
screw driver small