Avery Dennison Rewinder - Manual (Page 15)

Manual Rewind Option
06/01 Rev. 2.09 15
Tooth belt
The tooth belt is transferring the power from the stepper motor to the guiding disc and has to
be controlled from time to time.
Assembly/Disassembly tooth belt
• remove roll profile and guiding disc
(see roll profile and guiding disc)
• the tooth belt can be removed c
controlled and maybe changed
• to insert the belt again follow
the steps below
• insert tooth belt around stepper gear
and tighten part (tighten part has to
be open)
• mount guiding disc to axle
• hold down the belt with a small screw
driver in the area of the motor gear
(see picture)
• moving guiding disc slow to slip the
belt over the gear
• secure guiding disc
Tooling
screw driver small