Avery Dennison 9406 Operator Handbook - Manual (Page 40)

The default setting for Secondary Sign is No. To change the
setting, follow the steps listed under "Finding Default Options."
Then follow the steps below.
1. Press
R
until you see
DEFAULTS
< Secondary Sign >
2. Press
E
. You will see the previous setting, for example
SECONDARY SIGN
No >
3. Press
R
or
L
until you see the option you want. Then
press
E
. You will see
DEFAULTS
< Secondary Sign >
4. Press
Q
to exit to the Setup menu.
5. Press
Q
to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu before turning your
printer off. The printer will not save changes to
these menus if you turn it off before returning to
the Main Menu.
9406 Operator’s Handbook
6-4