Avery Dennison 9406 Operator Handbook - Manual (Page 16)

2. Press
E
. You will see
SETUP
Supply >
3. Press
E
. You will see the first supply option.
SUPPLY
Ribbon >
To change one of these options, follow the instructions under
the correct heading. To exit an option without changing the
setting, press
Q
.
Ribbon
You can print with or without a ribbon, but you have to tell the
printer which option you want.
The default setting for ribbon is Yes. To change the setting,
follow the steps under "Finding the Supply Options." Then
follow the steps below.
1. Press
E
to set the ribbon option. You will see the
previous setting, for example
RIBBON
< Yes
2. Press
R
or
L
until you see the option you want. Then
press E . You will see
SUPPLY
Ribbon >
9406 Operator’s Handbook
3-2