Avery Dennison 9406 Operator Handbook - Manual (Page 28)

2. Press
E
. You will see
SETUP
Supply >
3. Press
R
until you see
SETUP
< Port Settings
4. Press
E
. You will see the first communications option.
PORT SETTINGS
Baud Rate >
To change one of these options, follow the instructions under
the correct heading. To exit an option without changing the
setting, press
Q
.
Baud Rate
The default setting for Baud Rate is 9600. To change the
setting, follow the steps listed under "Finding Communication
Value Options." Then follow the steps below.
1. Press E to set the baud rate. You will see the previous
setting, for example
BAUD RATE
< 2400 >
The options for baud rate are
1200
2400
4800
9600
9406 Operator’s Handbook
4-2