Avery Dennison 9406 Operator Handbook - Manual (Page 15)

3. Setting Supply Options
You may need to set supply options often to adjust for different
supplies. The options are shown below with the default settings
in bold.
1. Ribbon Settings No Yes
2. Supply Type Non-indexed Indexed
3. Dispense Mode Continuous On-demand
4. Adjust Print Position -999 to +999 dots +0
5. Adjust Supply Position -99 to +99 dots +0
6. Adjust Margin Position -99 to +99 dots +0
Finding the Supply Options
Follow these steps to position yourself in the menu system to
be able to set supply options.
1. From the Main Menu, press
R
or
L
until you see
MAIN MENU
< Setup >
SUPPLY CONTRAST DEFAULTS PORT
SETTINGS
RIBBON
MAIN MENU
PRINT
MODE SETUP DIAG.
SUPPLY
TYPE
SUPPLY
POS
DISPENSE
MODE
PRINT
POS
MARGIN
POS
S
e
tt
ing
S
upp
ly
Opt
io
n
s
3-1