Avery Dennison 9406 Operator Handbook - Manual (Page 34)

2. Press
E
. You will see
Are you sure?
No >
3. You can:
•
press Q to exit without changing the values. You will
return to the Port Setting menu.
•
press
R
and then
E
to set the values to the defaults.
You will see
PORT SETTINGS
< Reset
4. Press
Q
to exit to the Setup menu.
5. Press Q to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu before turning your
printer off. The printer will not save changes to
these menus if you turn it off before returning to
the Main Menu.
6. Verify that the default settings are correct by printing Test
Label 2 (the current communication parameters appear on
the label). See "Printing a Test Label" in
Read This First.
9406 Operator’s Handbook
4-8