Avery Dennison 9406 Operator Handbook - Manual (Page 13)

Start Up
When you turn the printer on, the printer displays copyright and
format loading messages. Then you will see
Calibrating...
as the printer checks the supply. If the supply type is set to
Indexed and indexed supplies are installed, the printer
calibrates to determine the length of each label so the printed
image is positioned correctly. If the supply type is set to
Non-Indexed and non-indexed supplies are installed, the
printer feeds out three inches of supply.
You will see another message as the printer loads formats.
When the printer has completed the start up process, you will
see
PRINT MODE
Ready
NOTE: If you are using the printer for the first time, press Q
to display the Main Menu.
Selecting a Function
The Main Menu has several functions (operating modes). The
Main Menu functions are shown in the chart below. Each
operating mode has several other functions.
MAIN MENU
PRINT
MODE SETUP DIAG.
G
e
tt
in
g
St
a
rte
d
2. Getting Started
2-3