Avery Dennison Sierra Sport4 9493 System Administrator Guide - Manual (Page 29)

Appendix A-1
A P P E N D I X
This appendix lists cable information for the 9493™ printer’s cable ports. Refer to the
Operator’s Handbook available on our Web site for information about connecting cables.
S e r i a l P o r t
The 9493 printer has a 9-pin serial port. For best results, use Monarch cables. Contact your
Monarch representative to order cables.
9-pin (Female)
Pin # Name Description
1 N/A Reserved – Do not connect
2 RXD Received Data
3 TXD Transmitted Data
4 DTR / 5V Data Terminal Ready (user configurable)
5 GND Signal Ground
6 DSR Data Set Ready
7 RTS Request to Send
8 CTS Clear to Send
9 N/A Not connected
U S B P o r t s
The 9493 printer has both a Type-A and a Type mini-B USB port. For best results, use Monarch
cables. Contact your Monarch representative to order USB cables. See “USB Mode” in
Chapter 2 for information on setting up the USB port.
8 0 2 . 3 E t h e r n e t P o r t
The 9493 printer uses an RJ-45 Ethernet plug. Refer to the Network System Administrator’s
Guide for information on using Ethernet.
A