Avery Dennison Sierra Sport4 9493 System Administrator Guide - Manual (Page 21)

Using Diagnostics 3-1
U S I N G D I A G N O S T I C S
This chapter explains how to use the Tools, Diagnostics menu. Only System Administrators
should perform these tests. You can view test results but you cannot change any of the
settings. If there is a problem with the printer, give the results of these tests to Service.
D i a g n o s t i c s
The Diagnostics menu helps diagnose problems with the printer.
1. Turn on the printer by pressing P.
The display flashes printer version information, battery charging status, and then you
see
2. Press under . You see the Pause screen.
As you use the printer, the battery indicator line gets closer to E (empty), instead of F
(full). Recharge the battery when the line is by the E.
3. Press A to enter the main menu.
4. Tools is highlighted. Press e to select Tools.
5. Press A under the corresponding number to enter the following default password:
1, 1, 1, 3, 1
You see
6. Diagnostics is highlighted. Press e to select Diagnostics.
You are now in the Diagnostics menu.
3