beautypg.com

Avalon Firestyles GreenStart Igniter 2 for Freestanding Stoves User Manual

Page 4

background image

GreenStart Igniter 2 for Freestanding Stoves

Installation Instructions

(SKU 94400953)

Page 4 of 27

17601769.docx— 12/11/13

© Travis Industries, Inc.

Installation – Answer, Liberty, Olympic, Rainier

1. Remove the firebrick covering the igniter housing from the firebox. Install the igniter firebrick as shown

below. The igniter firebrick has a special hole drilled in it that the igniter will penetrate. Replace the 2
removed floor firebricks.
NOTE: The firebrick for the Answer is the first brick on the right side of the rear of the firebox.

2. Remove the cover plate from the rear of the stove as shown below. Retain the screws.

3. Remove the convection chamber cover plate and gasket, as shown below. Retain the screws and

gasket.