beautypg.com

Avalon Firestyles GreenStart Igniter 2 for Freestanding Stoves User Manual

Page 10

background image

GreenStart Igniter 2 for Freestanding Stoves

Installation Instructions

(SKU 94400953)

Page 10 of 27

17601769.docx— 12/11/13

© Travis Industries, Inc.

Attaching the Compressor Assembly to the Stove, continued

9. Attach the igniter switch to the bottom of the stove using the 10-24 x ½” screws provided, as shown

below.

Olympic and Rainier models using the Ashpan Pedestal: The start button is installed onto the left
front corner.

10. Insert the 2 cable holders in the 2 holes on the underside of the stove. Route the start switch wire

under the stove, through the cable holders.

11. Push any excess start switch wiring into the compressor assembly.

NOTE: A lock-tie is included to secure excess wiring.