beautypg.com

Avalon Firestyles GreenStart Igniter 2 for Freestanding Stoves User Manual

Page 23

background image

GreenStart Igniter 2 for Freestanding Stoves

Installation Instructions

(SKU 94400951)

Page 23 of 27

17601769.docx — 12/11/13

© Travis Industries, Inc.

Endeavor Installation, continued

14. Attach the igniter cover box to the rear of the stove using the screws removed in step 2.

NOTE: For early Endeavor models, drilling an additional hole is required.

NOTE: The right side flange is tucked underneath the heat shield.

15. Insert the 2 cable holders into the 2 holes on the bottom of the stove. Route the start switch wire under

the stove, through the cable holders.

16. Push any excess start switch wiring into the compressor assembly.

NOTE: A lock-tie is included to secure excess wiring.