Digi MIL-3000FTX - Manual (Page 95)

MIL-3000FTX Series of FastPort Print Servers 9-8
Note: This only works if IPX is enabled in the General Parameters (under the
Parameters pull-down menu).
Figure 9-6. SNMP Fault Trace Message
9.5 Parameters Pull-Down Menu
There are a variety of options that can be configured from the Parameters
pull-down menu, including:
9.5.1 General Parameters
To configure the General Parameters section: From the “Parameters” pull-
down window, select
General Parameters (Figure 9-7). The following
are its options:
Figure 9-7. General Parameters Menu