Figure - figure 11-5. select bootptab file, Figure - figure 11-6. add entry to bootptab file – Digi MIL-3000FTX User Manual
Page 111
MIL-3000FTX Series of FastPort Print Servers
11-3
Figure 11-5. Select BOOTPtab File
4. To add a new entry to the “BOOTPtab” file, click
Add Entry to
BOOTPtab File
from the “File” pull-down window.
Figure 11-6. Add Entry to BOOTPTab File
To add a node with an Ethernet address of “0040C8XXXX02” and an IP
address of “199.86.11.1,” enter
00.40.C8.XX.XX.02
in the “Hardware
Address” box, and
199.86.11.1
in the “IP Address” box.
Note:
The host name is user selectable.
5. Click
Ok
.
Add entries for each field.