Digi MIL-3000FTX - Manual (Page 36)

MIL-3000FTX Series of FastPort Print Servers 3-11
3.2.5.3 Adding a New Printer
To add a new printer using “Add Printer Wizard”:
1. From Start --> Settings -->(open) Printers.
2. In the “Printers” menu, double-click Add Printer.
3. In the “Add Printer Wizard” menu, click Next to begin.
4. In the next menu, check Local Printer and click Next .
5. In the next menu, scroll down and select the appropriate printer. If the
designated printer came with an installation disk, click Have Disk . If
the designated printer did not come with an installation disk, see that
printer’s documentation for a compatible printer.
Figure 3-6. Select Printer Screen
6. Click the appropriate port for the printer and then click Next (e.g.,
Figure 3-8 shows “c:\spool\Epson-4300” as the designated port).
Figure 3-7. Select Port Screen
7. Type in a name for the printer and select this printer as the default
printer for Windows-based programs. Adding a name is optional. Click
Next .