Digi MIL-3000FTX User Manual
Mil-3000ftx series of fastport
MIL-3000FTX Series of FastPort
Print Servers
CD-ROM User’s Guide
For...
“Table of Contents”: Click here
“Introduction and Installation”: Click here
“Setting the IP Address”: Click here
“Installing and Printing in a MS Windows and IBM OS/2 Environment”: Click here
“Installing and Printing on NetWare”: Click here
“Installing and Printing on a UNIX Environment”: Click here
“Installing and Printing on an Apple Network”: Click here
“Print Management Features of FastPort”: Click here
“FastManage Installation”: Click here
“Discovery Application”: Click here
“FastPort Application”: Click here
“Ping and BOOTP Server”: Click here
“Resetting FastPort to Factory Defaults”: Click here
“Troubleshooting MS Windows”: Click here
“Troubleshooting NetWare”: Click here
“Troubleshooting UNIX”: Click here
“Troubleshooting AppleTalk”: Click here
“Upgrading Flash EEPROMs”: Click here
“Telnet, NBMON and Serial Connection Diagnostic Console Options”: Click here
“Troubleshooting FastManage”: Click here
Table of contents
Document Outline
- FrontHeading - MIL-3000FTX Series of FastPort
- Legal - Legal
- PreTitle - Table of Contents
- TitlePageTOC - Chapter 1: Introduction and Installation
- TitlePageTOC - Chapter 2: Setting the IP Address
- TitlePageTOC - Chapter 3: Installing and Printing in a MS Windows and IBM OS/2 Environment
- TitlePageTOC - Chapter 4: Installing and Printing on NetWare
- TitlePageTOC - Chapter 5: Installing and Printing on a UNIX Environment
- TitlePageTOC - Chapter 6: Installing and Printing on an Apple Network
- TitlePageTOC - Chapter 7: Print Management Features of FastPort
- TitlePageTOC - Chapter 8: FastManage Installation
- TitlePageTOC - Chapter 9: Discovery Application
- TitlePageTOC - Chapter 10: FastPort Application
- TitlePageTOC - Chapter 11: Ping and BOOTP Server
- AppTitlePgTOC - Appendix A: Resetting FastPort to Factory Defaults
- AppTitlePgTOC - Appendix B: Troubleshooting MS Windows
- AppTitlePgTOC - Appendix C: Troubleshooting NetWare
- AppTitlePgTOC - Appendix D: Troubleshooting UNIX
- AppTitlePgTOC - Appendix E: Troubleshooting AppleTalk
- AppTitlePgTOC - Appendix F: Upgrading Flash EEPROMs
- AppTitlePgTOC - Appendix G: Telnet, NBMON and Serial Connection Diagnostic Console Options
- AppTitlePgTOC - Appendix H: Troubleshooting FastManage
- AppTitlePgTOC - Appendix I: Technical Support Services
- Chapter - Chapter 1
- Chapter - Chapter 2
- TitlePage - Setting the IP Address
- Heading - 2.1 Assigning the IP Address
- Heading - 2.2 Setting an IP Address with Install Script
- Heading - 2.3 Setting the IP Address using Telnet on UNIX
- Heading - 2.4 Setting IP Address with Windows 95, 98, and NT
- Heading - 2.5 Setting the IP Address Using RARP
- Heading - 2.6 Setting the IP Address Dynamically with BOOTP
- Heading - 2.7 DHCP Support (NT 4.0 server)
- Heading - 2.8 Using Digi's ACT to Assign an IP Address
- Heading - 2.9 Using Appletalk to Assign an IP Address
- Heading - 2.10 Using Digi’s NetBIOS to Assign IP Address
- Heading - 2.11 Verifying IP Address is Set Properly
- TitlePage - Setting the IP Address
- Chapter - Chapter 3
- TitlePage - Installing and Printing in a MS Windows and IBM OS/2 Environment
- Heading - 3.1 Printing From a NetBIOS Workstation
- Heading2 - 3.1.1 Introduction
- Heading2 - 3.1.2 Printing from Windows for Workgroups
- Heading2 - 3.1.3 Printing from Windows NT (3.5x)
- Heading2 - 3.1.4 Printing from Windows 95/98 or Windows NT 4.x (via SMB)
- Heading2 - 3.1.5 Printing From NetBIOS-supported DOS Workstation
- Heading2 - 3.1.6 Spooling Versus Non-Spooling Printing
- Heading2 - 3.1.7 DOS and OS/2
- Heading - 3.2 Printing from a TCP/IP Workstation
- Heading2 - 3.2.1 Introduction
- Heading2 - 3.2.2 Printing from Windows NT 3.5x
- Heading2 - 3.2.3 Printing from Windows NT 4.0
- Heading2 - 3.2.4 Printing using a Third Party TCP LPR/LPD Stack
- Heading2 - 3.2.5 Printing from Windows 95/98 Using DigiLpr
- Heading - 3.3 Printing from NT using the HP DLC Protocol
- Heading - 3.4 Printing from Windows using TFTP Client
- Heading - 3.5 Management Tools Used with NetBIOS and TCP/IP
- Heading - 3.1 Printing From a NetBIOS Workstation
- TitlePage - Installing and Printing in a MS Windows and IBM OS/2 Environment
- Chapter - Chapter 4
- TitlePage - Installing and Printing on NetWare
- Heading - 4.1 Introduction
- Heading - 4.2 Configuring in a Bindery Environment
- Heading - 4.3 Installing a Print Server in an NDS Environment
- Heading - 4.4 Configuring in a Bindery and NDS Environment
- Heading - 4.5 Printing to FastPort
- Heading - 4.6 Printing Specific File Formats
- TitlePage - Installing and Printing on NetWare
- Chapter - Chapter 5
- TitlePage - Installing and Printing on a UNIX Environment
- Heading - 5.1 Introduction
- Heading - 5.2 Host Software Versus LPD
- Heading - 5.3 Digi Installation Software
- Heading - 5.4 Manual Installation on LPD Systems
- Heading2 - 5.4.1 Getting Started on an LPD System
- Heading2 - 5.4.2 Pre-defined Queue Names
- Heading2 - 5.4.3 User Defined Queue Names
- Heading2 - 5.4.4 LPR Options
- Heading2 - 5.4.5 Manual Installation With LPD on a BSD UNIX System
- Heading2 - 5.4.6 Manual Installation with LPD on System V Machines
- Heading2 - 5.4.7 Manual Installation with LPD on RS/6000
- Heading - 5.5 Manual Installation Using Host SoftWare (fpfilter)
- Heading - 5.6 Installing and Printing from Data General's DG/UX
- Heading - 5.7 Additional UNIX Utilities: Using pstext and NeWSprint
- Heading - 5.8 Deleting Printers
- TitlePage - Installing and Printing on a UNIX Environment
- Chapter - Chapter 6
- TitlePage - Installing and Printing on an Apple Network
- Heading - 6.1 Introduction to the Apple Workstation
- Heading - 6.2 Plug & Play Operation: Printing to FastPort
- Heading - 6.3 Advanced Utilities
- Heading - 6.4 Using the Apple Printer Utility for Configuration
- Heading - 6.5 Using Namer to Rename the FastPort Printer
- Heading - 6.6 Printing PostScript Binary Files
- Heading - 6.7 Bi-directional Printing from Macintosh Systems
- TitlePage - Installing and Printing on an Apple Network
- Chapter - Chapter 7
- TitlePage - Print Management Features of FastPort
- Heading - 7.1 Managing Print Server
- Heading - 7.2 Serial Port Console Monitoring
- Heading - 7.3 Managing FastPort from Networked Workstations
- TitlePage - Print Management Features of FastPort
- Chapter - Chapter 8
- Chapter - Chapter 9
- TitlePage - Discovery Application
- Heading - 9.1 Introduction to Discovery
- Heading - 9.2 Launching Discovery
- Heading - 9.3 FastPort Icon Names
- Heading - 9.4 Discovery Application Tools
- Heading2 - 9.4.1 Renaming a Discovery Map
- Heading2 - 9.4.2 Host Name/Address
- Heading2 - 9.4.3 Send Broadcast
- Heading2 - 9.4.4 Refresh Map
- Heading2 - 9.4.5 Discover Host
- Heading2 - 9.4.6 Using the Ping Manager
- Heading2 - 9.4.7 TFTP Icon: Flash Download
- Heading2 - 9.4.8 Close All Windows Icon
- Heading2 - 9.4.9 Show Node Properties
- Heading2 - 9.4.10 SNMP Fault Trace
- Heading - 9.5 Parameters Pull-Down Menu
- TitlePage - Discovery Application
- Chapter - Chapter 10
- TitlePage - FastPort Application
- Heading - 10.1 FastPort Application
- Heading - 10.2 Overview of Managing FastPort
- Heading - 10.3 FastPort Application
- Heading - 10.4 Configuration Sub-menus
- Heading - 10.5 Status Menu
- Heading - 10.6 Help Menu
- TitlePage - FastPort Application
- Chapter - Chapter 11
- Appendix - Appendix A
- AppTitlePg - Resetting FastPort to Factory Defaults
- AppLevel1 - A.1 Resetting by Toggling the DIP Switches
- AppLevel1 - A.2 Resetting by Console Option
- AppLevel1 - A.3 Hardware Features
- AppLevel1 - A.4 Serial Printer and Terminal
- FigureTitle - Figure A-1. Common Dumb Terminal Connection
- FigureTitle - Figure A-2. Cable for Terminal and Serial Printers
- FigureTitle - Figure A-3. DCE Device: Dumb Terminal or Serial Port
- FigureTitle - Figure A-4. Wyse 60 Dumb Terminal
- FigureTitle - Figure A-5. DTE Printer/Plotter and PC Null: DB25 Male
- FigureTitle - Figure A-6. DCE Printer/Plotter: DB25 Female
- AppLevel1 - A.5 Connectors
- AppLevel1 - A.6 Environmental Operating Conditions
- AppLevel1 - A.7 System LEDs
- AppTitlePg - Resetting FastPort to Factory Defaults
- Appendix - Appendix B
- Appendix - Appendix C
- AppTitlePg - Troubleshooting NetWare
- AppLevel1 - C.1 ACT-- Advance Configuration Tool
- AppLevel1 - C.2 Advanced Configuration Menu in ACT
- AppLevel1 - C.3 Status Menu in ACT
- AppLevel1 - C.4 Monitor Menu in ACT
- AppLevel1 - C.5 Troubleshooting Tips
- AppLevel2 - C.5.1 FastPort does not power up
- AppLevel2 - C.5.2 FastPort does not show up in ACT
- AppLevel2 - C.5.3 FastPort fails POST after upgrading firmware
- AppLevel2 - C.5.4 FastPort does not login to bindery Novell 4.x server
- AppLevel2 - C.5.5 FastPort does not login to the file server
- AppLevel2 - C.5.6 FastPort does not print via serial port
- AppLevel2 - C.5.7 No Form Feed is sent after the print job
- AppLevel2 - C.5.8 PostScript jobs have trouble printing
- AppLevel2 - C.5.9 Autosensing printer has trouble printing
- AppLevel2 - C.5.10 MS Windows jobs print with an extra page
- AppLevel2 - C.5.11 File server displays an Incomplete Packet error message
- AppLevel1 - C.6 Notification not Working if Created by PCONSOLE
- AppLevel1 - C.7 FastPort Console Messages
- AppLevel1 - C.8 Could not attach QUEUE1
- AppLevel2 - C.8.1 Attaching queue QUEUE1 on server SERVER1
- AppLevel2 - C.8.2 Read Configuration File
- AppLevel2 - C.8.3 Could not Read Configuration file from SERVER1
- AppLevel2 - C.8.4 Trying to read file SYS:login/milan/FPXXXXXX on SERVER1
- AppLevel2 - C.8.5 No such object FAKEQ
- AppLevel2 - C.8.6 Failed to login to file server SERVER1 for server FAKEPS
- AppLevel1 - C.9 ACT Error Messages
- AppTitlePg - Troubleshooting NetWare
- Appendix - Appendix D
- Appendix - Appendix E
- AppTitlePg - Troubleshooting AppleTalk
- AppLevel1 - E.1 Troubleshooting Tips
- AppLevel1 - E.2 Setup for AppleTalk
- AppLevel2 - E.2.1 For a Serial Printer
- AppLevel2 - E.2.2 PostScript Binary print
- AppLevel2 - E.2.3 Troubleshooting
- AppLevel2 - E.2.4 Changing the FastPort Settings
- AppLevel2 - E.2.5 Troubleshooting Setup on AppleTalk
- AppLevel2 - E.2.6 More Troubleshooting
- AppLevel2 - E.2.7 Downloading the Setup Defaults File to Change FastPort
- AppTitlePg - Troubleshooting AppleTalk
- Appendix - Appendix F
- Appendix - Appendix G
- AppTitlePg - Telnet, NBMON and Serial Connection Diagnostic Console Options
- AppLevel1 - G.1 Diagnostic and Configuration Commands: Commands
- AppLevel1 - G.2 C—Configure Console (for status monitoring)
- AppLevel1 - G.3 D—Display Summary Configuration Parameters, Including
- AppLevel1 - G.4 E—Display/Set Ethernet Options
- AppLevel1 - G.5 F—Flash Firmware Load Enable/Disable
- AppLevel1 - G.6 I—Display/set IP Address
- AppLevel1 - G.7 L—Limit monitor Network Access by Password
- AppLevel1 - G.8 N—Network Protocols Menu
- AppLevel1 - G.9 P—Display/Set Parallel Port Parms and Status
- AppLevel1 - G.10 S—Display/set Serial Port Parms
- AppLevel1 - G.11 Z—Reset NVRAM to Factory Defaults
- AppLevel1 - G.12 *—Print ASCII Test Page
- AppLevel1 - G.13 +—Print PostScript Test Page
- AppTitlePg - Telnet, NBMON and Serial Connection Diagnostic Console Options
- Appendix - Appendix H
- Appendix - Appendix I
- IndexTitle - Index
- GroupTitlesIX - Symbols
- GroupTitlesIX - Numerics
- GroupTitlesIX - A
- GroupTitlesIX - B
- GroupTitlesIX - C
- GroupTitlesIX - D
- GroupTitlesIX - E
- GroupTitlesIX - F
- GroupTitlesIX - G
- GroupTitlesIX - H
- GroupTitlesIX - I
- GroupTitlesIX - L
- GroupTitlesIX - M
- GroupTitlesIX - N
- GroupTitlesIX - O
- GroupTitlesIX - P
- GroupTitlesIX - Q
- GroupTitlesIX - R
- GroupTitlesIX - S
- GroupTitlesIX - T
- GroupTitlesIX - U
- GroupTitlesIX - W
- GroupTitlesIX - X
- GroupTitlesIX - Y
- GroupTitlesIX - Z