Avalon Firestyles Bed & Breakfast Installation - Manual (Page 12)

12 Installation
(for qualified installers only)
Travis Industries 4140312 100-01305
Converting the Fireplace to Rear Vent (continued)
Insert the large piece of insulation into
the intake duct. Note how the wider
portion goes to the sides. Tuck it into
the cavity so it lays flat.
Remove the flue collar suport, rotate it 180°, and re-attach it to the fireplace.
Insert the small piece of insulation into the exhaust
duct. Tuck it into the cavity so it lays flat.
Attach the exhaust cover
plate, making sure the
attached gasket seals the
exhaust duct.