ARRIS 2247-N8-10NA (v9.1.x) Admin Handbook User Manual
Page 65
65
The default is
on
.
set security spi ip4 private-addr-drop [ on | off ]
Enables or disables whether Broadband packets with private source or destination addresses should be
dropped. Default is
off
.
set security spi flood-limit enable [ on | off ]
Enables or disables whether packet flooding should be detected and offending packets be dropped. Default is
on
.
set security spi flood-limit limit pps_value
Sets a maximum Packets Per Second (PPS) value for packet flood criterion. Defaults to
4
.
set security spi flood-limit burst-limit max_value
Sets a maximum value in a packet-burst for packet flood criterion. Defaults to
8
.
set security spi flood-limit icmp enable [ on | off ]
Enables or disables whether ICMP packet flooding should be detected and offending packets be dropped.
Defaults to
on
.
set security spi flood-limit udp enable [ off | on ]
Allows you to include or exclude UDP traffic rom flood limiting. Defaults to
off
.
set security spi flood-limit udp pass-multicast [ off | on ]
Allows you to exclude UDP multicast traffic from throttling. Defaults to
on
.
set security spi flood-limit tcp enable [ off | on ]
Enables or disables whether TCP packet flooding should be detected and offending packets be dropped.
Defaults to
off
.
set security spi flood-limit tcp syn-cookie [ on | off ]
Allows TCP SYN cookies flooding to be excluded. Defaults to
on
.