ARRIS 2247-N8-10NA (v9.1.x) Admin Handbook - Manual (Page 56)

Administrator’s Handbook
56
set management web http-port [ 1 - 65534 ]
Specifies the port number for HTTP (web) communication with the 2247-N8. Because port numbers in the
range 0-1024 are used by other protocols, you should use numbers in the range 1025-65534 when assigning
new port numbers to the 2247-N8 web configuration interface. A setting of
0 (zero) will turn the server off.
set management web https-port [ 1 - 65534 ]
Sets the secure web access port for secure management of the 2247-N8. Default is port 443 .
set management web https-cert-cn string
Specifies a certificate from a trusted certificate authority to identify the secure web access.
set management web idle-timeout [ 1...120 ]
Specifies a timeout period of inactivity for HTTP access to the gateway, after which a user must re-login to the
gateway. Default is
30 minutes for HTTP.
Remote access commands
set management remote-access http-port [ 1 - 65534 ]
Sets the web access port for remote access management of the gateway. Default is port 51003 .
set management remote-access http-idle-timeout [ 1...120 ]
Specifies a timeout period of inactivity for remote HTTP access to the gateway, after which a user must re-login
to the gateway. Default is
5 minutes for HTTP.
set management remote-access http-total-timeout [ 1...120 ]
Specifies a total timeout period of inactivity for remote HTTP access to the gateway, after which a user must re-
login to the gateway. Default is
20 minutes for HTTP.
set management remote-access http-max-clients number
Specifies the maximum number of client sessions for remote web access management. Defaults to 0 (unlim-
ited).
set management remote-access https-port [ 1 - 65534 ]
Sets the secure web access port for remote access management of the gateway. Default is port 51443 .
set management remote-access https-idle-timeout [ 1...120 ]
Specifies a timeout period of inactivity for secure remote HTTPS access to the gateway, after which a user must
re-login to the gateway. Default is
20 minutes for HTTPS.
NOTE:
You cannot specify a port setting of 0 (zero) for both the web and telnet ports at the same time. This would
prevent you from accessing the gateway.