ARRIS 2247-N8-10NA (v9.1.x) Admin Handbook - Manual (Page 42)

Administrator’s Handbook
42
set ip6 conn name name dhcp-server enable [ off | on ]
Enables the DHCPv6 server for this connection.
set ip6 conn name name dhcp-server T1-override [ off | on ]
Enables the DHCP server T1 override for this connection.
set ip6 conn name name dhcp-server T2-override [ off | on ]
Enables the DHCP server T2 override for this connection.
set ip6 conn name name dhcp-server na enable [ off | on ]
Enables DHCP server NA for this connection.
set ip6 conn name name dhcp-server na addr-count count
Sets the DHCP server NA address count. The default is 64.
set ip6 conn name name dhcp-server na start-addr-offset offset
Sets the DHCP server NA start address offset. The default is 10.
set ip6 conn name name dhcp-server ta enable [ off | on ]
Enables DHCP server TA for this connection.
set ip6 conn name name dhcp-server pd name name enable [ off | on ]
Enables DHCP server PD for this connection.
set ip6 conn name name dhcp-server pd name name conn-oid conn-oid
Sets the DHCP server PD conn-oid.
set ip6 conn name name dhcp-server pd name name subnet-length length
Sets the DHCP server PD subnet length. The default is 64.
set ip6 conn name name dhcp-server pd name name subnet-id id
Sets the DHCP server PD subnet ID. The default is 0x0.
set ip6 conn name name dhcp-server pd name name stay-up [ off | on ]
Enables DHCP server PD stay up. The default is off.
set ip6 conn name name dhcp-server pd-add-length length
Sets the DHCP server PD add length. The default is 0.