ARRIS 2247-N8-10NA (v9.1.x) Admin Handbook - Manual (Page 15)

15
nslookup [ hostname | ip_address ]
Performs a domain name system lookup for a specified host.
‹ The hostname argument is the name of the host for which you want DNS information; for example,
nslookup klaatu
.
‹ The ip_address argument is the IP address, in dotted decimal notation, of the device for which you want
DNS information.
ping [-s size] [-c count ] [ hostname | ip_address ]
Causes the 2247-N8 to issue a series of ICMP Echo requests for the device with the specified name or IP
address.
‹ The hostname argument is the name of the device you want to ping; for example,
ping ftp.motorola.com
.
‹ The ip_address argument is the IP address, in dotted decimal notation, of the device you want to locate.
If a host using the specified name or IP address is active, it returns one or more ICMP Echo replies, confirm-
ing that it is accessible from your network.
‹ The
-s
size argument lets you specify the size of the ICMP packet.
‹ The
-c
count argument lets you specify the number of ICMP packets generated for the ping request. Val-
ues greater than 250 are truncated to 250.
You can use the ping command to determine whether a hostname or IP address is already in use on your net-
work. You cannot use the ping command to ping the 2247-N8’s own IP address.
quit
Exits the 2247-N8 command line interface.
6rd-check [-s size] [-c count] conn_name
Generates and sends 6rd loopback packets to the 6rd gateway.
reset arp
Clears the Address Resolution Protocol (ARP) cache on your unit.
reset crash
Clears crash-dump information, which identifies the contents of the 2247-N8 registers at the point of system
malfunction.
reset dhcp server
Clears the DHCP lease table in the 2247-N8.
reset enet [ all ]
Resets Ethernet statistics to zero. Resets individual LAN switch port statistics as well as wireless and WAN
Ethernet statistics (where applicable).
reset ipmap
Clears the IPMap table (NAT).