Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual User Manual
Page 90
SD/HD Signal Generation
SMPTE bars (requires valid HDvideo source for clock on 7712 IO sled)
•
OSD
DVB Information
Service Name
◊
Service Provider
◊
Network Information (Satellite, Terrestrial, Cable)
◊
♦
ASTC Information
Name
◊
Long Name
◊
♦
•
Audio Tones
Selectable Frequency from 440hz to 6Khz
♦
Selectable Mute for L/R individually foe each of the four (4) pairs
♦
•
Encoder Video Input
Standard Definition Video Inputs (Encoder)
Analog NTSC and PAL Composite (BNC)
♦
SD-SDI (SMPTE 259M) with embedded audio (SMPTE 272M)
♦
Auto detect SD 270Mbps for SD
♦
D1 Encoding Only - no internal up-conversion.
♦
•
Standard Definition Video Pre-Processing
Encoder Filters (SD Only)
♦
Temporal and Spatial (Median)
♦
Time Base Corrector (TBC) on SDI Inputs for SD Only
♦
Chromafiltering and Scaling fo NTSC/PAL
♦
•
High Definition Video
HD-SDI input video (SMPTE 292M)w/embedded audio (SMPTE 299M) with auto-detect for HD 1.485 Gbs.
♦
•
High Definition Video Inputs (Encoder)
SDI (SMPTE 292M) with embedded audio (SMPTE 299M) - Auto detect HD 1.485 Gbs.
♦
3G-SDI input video, (SMPTE 424M) w/embedded audio (SMPTE 299M)
♦
SDI and HD-SDI are the same connector with auto standard resolution and frame rate detection.
♦
•
Audio Inputs
Analog audio input on DB15 male.
Two stereo pairs (includes 1/2 meter DB15 to 4 XLR male breakout cable)
♦
•
AES3-1 digital audio input uncompressed LPCM or compressed bit stream passthrough from external Dolby E, 5.1,
2.0 (AC3) Linear Acoustic Stream Stacker via BNC - 75 Ohm input.
•
AES3-2 digital audio input uncompressed LPCM or compressed bit stream passthrough from external Dolby E, 5.1,
2.0 (AC3) Linear Acoustic Stream Stacker via BNC - 75 Ohm input.
•
AES3-3 digital audio input uncompressed LPCM in - MPEG 1 Layer 2 encoding only.
•
AES3-4 digital audio input uncompressed LPCM in - MPEG 1 Layer 2 encoding only.
•
SDI embedded per SMPTE 272M for SD and SMPTE 299M for HD with support for up to 16 channels based on
group selection. User selectable concurrency for Groups 1 and 2 or 3 and 4 (8 channels concurrently).
•
SDI Matrix (shuffle) allows selection of any pair within two groups of embedded audio to be routed to the audio
encoder or passthrough.
•
User-defined analog and digital Audio level control with sample rate conversion on all four AES3, analog and
embedded SDI audio inputs.
•
Audio CODEC Profiles
Dolby Digital 2.0 (AC3) Two (2) stereo encoders included
•
MPEG1 Layer 2 Four (4) stereo encoders included
Support for Phase Alignment standard.
♦
•
Intelligent Dolby E, Dolby 5.1 and Dolby Digital 2.0 (AC3) LPCM (SMPTE 302M), Linear Acoustic Stream Stacker
passthrough on AES3 1, 2 and SDI
•
Transport Outputs
ISO13818-1 MPEG 2 Transport Stream per EN 50083-9:1997 (188 byte only)
Three (3) mirrored outputs
via BNC 75 ohm
♦
Maximum Transport Rate: 100 Mbs
♦
•
•
www.adtecdigital.com