Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual User Manual

Page 16

Definitions

Item

Function

Options

Adtec API

Commands

Status

provides information regarding decoder function

Playing, Idling, Multicast
Rec., etc

*.DCMD TRA

Confidence
Decoder

turns confidence decode on or off; when active, this feature
allows content to be reviewed on a monitor prior to transport

On
Off

*.ECMD CDE

Display Target

Television resolution; set to match resolution of the intended
display;
unit will scale up/ down to match.

See Supported Targets
below

*.DCMD VID

DVB-ASI
Mode

Enable or disable the DVB_ASI input port. If receive mode is
enabled, and a valid DVB-ASI signal is detected, the unit will
play the stream.

Off (disabled)
On (enabled)
DER
DLT (latency)

*.DCMD DVB

Program
Number

Program Number in PAT & PMT packet identifies which
program is associated with which Video & Audio PIDs.

0x0001 - 0xFFFF are
valid ID assignments

*.DCMD DPN

Audio Track

identifies audio track to be decoded

Track 1
Track 2

*.DCMD TSN

Display Resolutions

NTSC

1080P60*

NTSC-J

720P59

PAL

1080i59

PAL-M

720P24

720P50

720P60

1080P24

1080I50

1080P50

1080I60

* The mediaHub-HD 422's Decoder module only supports this display target for HDMI output. It does not actually decode
1080P60, but will scale and/or de-interlace its decoded video to produce 1080P60 for output on HDMI.

Note on VESA Resolutions: Rev. A Units support most VESA resolutions.