Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual - Manual (Page 37)

Introduction to the Control Application
A web-based command and control (C&C) software application comes pre-installed on the mediaHub HD 422. Online updates
will be available when future versions of this software is released along with product firmware.
Firefox: 3.0 (recommended) •
MS Internet Explorer: 7.0 and higher •
Safari: 3.0 and higher •
Opera: 9.0 and higher •
Note for Safari users:
The C&C program is designed to use the Bonjour Zero Configuration Protocol.
When using Safari ©, click on the " ^^ " symbol to open a networked devices list. ♦
Select the device to point the browser to that device's IPA. ♦
•
Access
Access the C&C application by pointing your web browser to the unit's IP address. The following screen (image reduced for
clarity) will appear:
Links to the unit's Release Notes and a link to Adtec's Technical Support contact page are also located on this screen.
Login
Log in to the C&C application by clicking the "Proceed to Login" button and typing in the user name 'adtec' and the
password 'none' in the pop-up box that appears.
C&C Screen
Once you are logged in, the C&C Screen will appear (screenshot reduced for clarity):
www.adtecdigital.com