Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual User Manual

Page 55

Aspect Ratio

ratio of horizontal to vertical lines in the encoded image

4 x 3 = 0
16 x 9 = 1
WSS (PAL) =
2

*.ECMD ARA

Temporal
Video Filter

reduces noise in the signal's temporal domain
Note: composite input only; handled in the video pre-processing section;
and only available in standard definition

Off = 0
Weak = 1
Medium = 2
Max = 3

*.ECMD OFT
[state]

AFD

Active Format Descriptor; data that can be sent in a MPEG video stream
that provides information about the aspect ratio and picture characteristics
within the stream

see drop-down
in UI

*.ECMD AFD

Spatial Video
Filter

reduces noise in the signal's spatial domain
Note: composite input only; handled in the video pre-processing section;
and only available in standard definition

Off = 0
Weak = 1
Medium = 2
Max = 3

*.ECMD OFS
[state]

AVC Only Settings

Controls:

Control

Function

Options

API

Command

Deblock
Filtering

Deblock Filtering aims to improve the appearance of decoded
pictures by smoothing the sharp edges and only applies when
encoding MPEG 4 / AVC.

Off =0
On=1

*.ECMD DBF

Video Field
Coding

Video Field Coding designates the type of interlaced-scan video
coding used during encoding.

-Field mode coding (PAFF)
-Frame mode coding
(MBAFF)
-Adaptive field/frame mode
coding (PAFF/MBAFF)

*.ECMD VFC

Confidence Decode

Controls:

Control

Function

Options

API Command

DVB

select function for decoder; receive or ignore DVB

Off
Receive

*.DCMD DPN

Program
Number

program identification of the number of programs embedded in the
incoming DVB-ASI stream

none, receives
from stream;
display only

none

Confidence
Decode

Confidence Decode can be set turned OFF or you may select the
standard to use when confidence decoding. Selecting Confidence
Decode will set up decoding on the SDI, HDMI or CVBS interfaces.

Off
Confidence
Decode
DVB-ASI

Confidence
Decode:
*.ECMD CDE
DVB-ASI:
*.DCMD DVB

Auto Resolution

Auto Resolution refers to the current decoder display target. If it is set
to ON, the confidence decoder will detect the resolution of the current
encode and match it. If it is set to OFF, you may select your desired
display target.

Off
On

*.ECMD CDE
AUTORES

Display Target

the targeted video resolution; set to match resolution of the intended
display, the decoder scales automatically; HDMI is not active when SD
resolutions are used

see Decoder
Menu

*.DCMD VID

AFD

Decoder Active Format Descriptors can be turned on and off .If ON, the
decoder will read the Active Format Description in the encoded stream
periodically and modify the format of the output to match the AFD
settings. If the output is analog (NTSC, PAL, etc), WSS will be inserted
to signal the receiver with the AFD setting. NOTE: Turning this setting
on will force the OUTPUTASPECTRATIO OAR for the decoder off.

Off
On

*.ECMD AFD