Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual - Manual (Page 12)

Definitions
Network Menu
Item Function Options
ADTEC API
Command
Ethernet IP
Address
IP address of unit on your network
user-defined using arrow> and buttons
default is 192.168.10.48*.sysd IPA 0Ethernet Mask Defines the unit relative to the rest of your networkuser-defined using arrow> and buttons
default is 255.255.255.0
*.sysd IPA 0
Ethernet Mask Defines the unit relative to the rest of your network
user-defined using arrow> and
*.sysd IPM 0
Ethernet
DHCP
Dynamic Host Configuration Protocol; allows
mediaHub to self-locate network Ethernet
parameters
On (finds own DHCP Address)
Off (defaults to last entered IP
Address)
default is OFF
*.sysd DHCP
eth0
GigE IP
Address
route of traffic in/out on IPTV
user-defined using arrow> and buttons
default is 192.168.20.48*.sysd IPA 1GigE Maskdefines unit relative to the rest of an IPTV networkuser-defined using arrow> and buttons
default is 255.255.255.0
*.sysd IPA 1
GigE Mask defines unit relative to the rest of an IPTV network
user-defined using arrow> and
*.sysd IPM 1
GigE DHCP
Dynamic Host Configuration Protocol; allows device
to self-locate network GigE parameters
On (finds own DHCP Address)
Off (defaults to last entered IP
Address)
default is OFF
*.sysd DHCP
eth1
Gateway IP
Address
traffic director for off-LAN resources
user-defined using arrow> and buttons
default is 192.168.10.1*.sysd GIP Time MenuItemFunctionOptionsAdtec APICommandsTimespecifies system timeuser-defined using and
buttons
*.sysd GIP
Time Menu
Item Function Options
Adtec API
Commands
Time specifies system time
user-defined using and
*.sysd TIM
Timezone
specifies time zone unit
operates in user-defined using and
buttons*.sysd TIZ NTP MenuItemFunctionOptionsAdtec APICommandsNTP StatusNetwork Transfer ProtocolDefines whether or not your unit is in sync with the
designated NIP servernoneNTP IP
AddressIP address designated for Network
Transfer Protocoluser-defined using and
buttons
*.sysd TIZ
NTP Menu
Item Function Options
Adtec API
Commands
NTP Status Network Transfer Protocol
Defines whether or not your unit is in sync with the
designated NIP server
none
NTP IP
Address IP address designated for Network
Transfer Protocol user-defined using and
*.sysd NIP
Alarm Menu
Item Function Options
Event Record Log of events outside of operating parameters scroll up and down to view log items
Mirror Menu
Item Function Options
Adtec API
Commands
Host Mode
Designates whether the unit is mirroring another
server, or serving as a stand-alone client.
MirrorClient?
MirrorList
Client
*.sysd HOM
www.adtecdigital.com