Zg_logging – Zilog EZ80F91GA User Manual
Page 64
ZGATE Shell Command Reference
UM024502-1012
52
ZGATE Embedded Security Development Kit
User Manual
zg_logging
Syntax
zg_logging off|show> Subcommands size Sets the maximum log file size. The value specified must be th_size Sets the maximum threshold log file size. The value specified screen Used to turn on/off logging to the ZTP console. file Used to turn on/off logging to the Zilog File System (ZFS). show Displays the ZGATE threshold logging configuration. Description The zg_logging command modifies ZGATE’s logging behavior. ZGATE can be config- ured to log information to the ZTP console (viewable on a PC running a terminal emula- When logging is enabled (especially if logging to ZFS), system performance will be To learn more, refer to the chapter titled Examples [ZTP EXTF:/]>zg_logging size 10 [ZTP EXTF:/]> [ZTP EXTF:/]>zg_logging th_size 5 [ZTP EXTF:/]> [ZTP EXTF:/]>zg_logging screen off [ZTP EXTF:/]> [ZTP EXTF:/]>zg_logging file on [ZTP EXTF:/]> [ZTP EXTF:/]>zg_logging show Note:
between 1 and 1000 to set the maximum log file size between
1 KB and 1 MB.
must be between 1 and 1000 to set the maximum threshold log
file size between 1 KB and 1 MB.
tion program) and/or to the Zilog File System (only if the ZTP project includes ZFS
support).
impacted.