TVLogic LVM-174W - Manual (Page 32)

32 Multi Format LCD Monitor
7. Button Functions(LVM-212W)
[1] Analog Input Button [2] HDMI Button
[2] SDI Button
● ●
The LVM-212W supports various Analog
input signals.
1. Press the [ANALOG] button on the front of
the monitor and OSD menu is activated as
picture to the left.
Use the Knob to move to desired Input signal
and press the Knob to select the Input signal.
2. Input signal information is displayed at the
bottom of the OSD menu.
3. Press [ANALOG] button again to remove the
OSD menu from display.
# If no image is displayed after selecting the
desired input mode, check and make sure that
connection is not lose or disconnected.
● ●
The LVM-212W supports HDMI/DVI Digital
input signals.
1. Press the [HDMI] button on the front of the
monitor and OSD menu is activated as picture
to the left.
Use the Knob to move to desired Input signal
and press the Knob to select the Input signal.
2. Input signal information is displayed at the
bottom of the OSD menu.
3. Press [HDMI] button again to remove the
OSD menu from display.
# If no image is displayed after selecting the
desired input mode, check and make sure that
connection is not lose or disconnected.
● ●
The LVM-212W supports 2 HD/SD/3G-SDI
input signals.
1. Press the [SDI-A] [SDI-B] button on the front
of the monitor.
2. Input signal information is displayed at the
bottom of the OSD menu.
3. Press [SDI] button again to remove the OSD
menu from display.
# If no image is displayed after selecting the
desired input mode, check and make sure that
connection is not lose or disconnected.