TVLogic LVM-174W - Manual (Page 30)

30 Multi Format LCD Monitor
6. Firmware Upgrade & Color Calibration
[2] Color Calibration
● ●
The K10-Probe(USB) is needed for Color
Calibration.
● ●
Select the [Display&Set ] menu to activate
- Connect the K10 Probe to the USB Slot on the
front of the monitor.
- Set the [Color calibration] as [On].
- Then the USB Color Probe is searched
automatically.
- After [Color calibration start] is selected, the
message window comes on. Select the [Yes]
to proceed the Uprgrade.
* After the calibration starts, various patterns
come on the screen and conduct the color
calibration.
*When the Color Calibration is completed, the
normal picture is shown on the screen. The
Color Temperature is set as 6500K.
* The Color Calibration takes about 30
minutes.
- The [Color calibration] activates when the
USB connection is completed.
* If the feature does not activate, disconnect
the USB and re-connect to the monitor.
Repeat the same process in 5 seconds.
- Set the value of [Gamma] and [Target
luminance].