TVLogic LVM-174W - Manual (Page 19)

Multi Format LCD Monitor 19
5. Menu Operations
[4] GPI / UMD
● ●
UMD character color
- Used to set the color of UMD. (White, Red,
Green, Yellow, Cyan, Magenta)
- Activates only when the [D-UMD tally type]
is set to [Default], [User color], [BG. Color],
[User tally] or [User BG.].
● ●
UMD B.G. trans.
- Used to set the transparency of the UMD
background box.
- Available values are [Opaque], [50%], [85%]
and [100%].
● ●
UMD size
- Used to set the size of the UMD Font and
Background box.
- Available values are [Small] and [Large].
● ●
D-UMD Tally Type
- Tally type configuration setting in D-UMD(D-
8C), UMD Display.
- Configuration values are DEFAULT and USER
COLOR.
* DEFAULT : Existing TV Logic operating
system (VRT)
* USER COLOR : User configuration settings on
each TALLY color type.
- TALLY1 COLOR ~ TALLY4 COLOR are activated
when USER COLOR is selected.
- CHARACTER : Tally displays with the
character color. Activates the same
as Default model.
- BG. COLOR : Tally is displayed as the
background of character. Activate the same
as Default mode.
- USER TALLY : The bit0 & bit 1 of TSL Protocol
Control Byte receives the input signal and
displays Tally by user’s set (OFF, WHITE, RED,
GREEN, BLUE, YELLOW CYAN, MAGENTA)
- USER char : This function activates in the
same way as USER TALLY and TALLY is
displays by the character color.
- USER B.G. : This function activates in the
same way as USER TALLY and Tally is displays
in the background of the character.
● ●
Tally1 Color ~ Tally4 Color
- Used to set the color of each TALLY1, TALLY2,
TALLY3 and TALLY4 .
- Available color settings are Red, Green and
Yellow.
● ●
B0:0 B1:0 ~ B0:1 B0:1
- The Byte0, Byte1 of TSL Protocol Control Byte
sets the color of the input conditions.
- Available colors are OFF, WHITE, RED, GREEN,
BLUE, YELLOW, CYAN and MAGENTA .