TVLogic LVM-174W - Manual (Page 22)

22 Multi Format LCD Monitor
5. Menu Operations
[4] GPI / UMD [5] Waveform
● ●
IP ADDRESS
- Used to set the IP address connected to a
Monitor.
● ●
SUBNET MASK
- Used to set the SUBNET MASK connected to
a Monitor.
● ●
GATEWAY
- Used to set the GATEWAY connected to a
Monitor.
● ●
PORT NO
- Used to set the port number. Default port
number is 10262.
● ●
Server IP address
- Used to input IP address of the Controller
provided by TVLogic (RMU-200).
● ●
Server port no.
- Used to input port no. of the Controller
provided by TVLogic (RMU-200).
● ●
Network settings apply
- When the value of IP address, Subnet mask,
Gateway or Port no. is changed, set the
Network settings apply as [on] to apply the
setting normally.
● ●
Waveform Intensity
- Used to control the brightness of the
WAVEFORM/VECTOR display.
- Available values are between 1 ~ 63. The
higher the number the brighter the
Waveform will be.
● ●
Waveform Trans.
- Used to control the transparency level of the
WAVEFORM/VECTOR.
- Available values are OPAQUE and TRANS.
* If the option is set to OPAQUE, the main OSD
will overlap with the WAVEFORM/VECTOR.
However, it will automatically display it as
transparent and goes back to opaque if the
main OSD disappears.
● ●
Wavform Size
- Used to control the size of WAVEFORM/
VECTOR.
- Available modes are Small and Large.