TVLogic LVM-174W - Manual (Page 17)

Multi Format LCD Monitor 17
REMOTE (RJ-45)
1: Pin1
2: Pin2
3: Pin3
4: Pin4
5: Pin5
6: Pin6
7: Pin7
8: GND
1 8
Menu
Classifi-
cation
Settable Values
PIN
1~6
NONE, ANALOG CHANNEL, HDMI
CHANNEL, SDI-A/B CHANNEL
TALLY RED, TALLY GREEN, BLUE
ONLY, UNDERSCAN, ASPECT
HVDELAY, 16:9 MARKER, 15:9
MARKER, 14:9 MARKER,
13:9 MARKER, 4:3 MARKER, 4:3 ON
AIR MARKER,
1.85:1 MARKER, 2.35:1 MARKER,
1.85:1 & 4:3 MARKER
CENTER MARKER, SAFETY AREA
80%, SAFETY AREA 88%,
SAFETY AREA 90%, SAFETY AREA
93%, SAFETY AREA 100%
Dynamic UMD, Focus Assist,
CC608(ANC), CC608(L21), CC708
*OP47, *OP42, *TELETEXT PAGE
801, *TELETEXT PAGE 888,
*TELETEXT PAGE 889
5. Menu Operations
[4] GPI / UMD
● ●
This item activate/ deactivate the
REMOTE function.
- The user may connect an RJ-45 jack to the
REMOTE terminal on the rear of the unit and
designate a function for each pin.
● ●
The default settings are as follows :
PIN 1 : ANALOG CHANNEL
PIN 2 : HDMI CHANNEL
PIN 3 : SDI_A CHANNEL
PIN 4 : SDI_B CHANNEL
PIN 5 : TALLY R
PIN 6: TALLY G
- PIN 7 is POWER ON/OFF use only and PIN 8 is
GND.
* Only available with LVM-212W model.
● ●
The selectable values are as follows :