TVLogic LVM-174W - Manual (Page 26)

26 Multi Format LCD Monitor
● ●
System Default
- Used to initialize OSD values to factory
default.
● ●
User config set
- Used to save and apply three kinds of user
configuration.
- Available modes are USER1, USER2 and
USER3.
- Effective items for each USER1, USER2 and
USER3 settings are [MARKER 1/2] menu of
MARKER, CENTER MARKER, SAFETY AREA,
MARKER MAT and MARKER COLOR and
[PICTURE 1/3] menu of , BRIGHT, CONTRAST,
CHROMA, PHASE and APERTURE.
● ●
OSD position
- Controls the OSD position.
- Available positions are CENTER, Top-
Right(R-T), Bottom-Right(R-B), Bottom-
Left(L-B) and Top-Left(L-T).
- When the [WAVEFORM] menu of
WAVEFORM/VECTOR is activated, the OSD
position cannot be set to Bottom-Right(R-B)
and Bottom- Left(L-B).
Key LED
- Used to control KEY LED ON/OFF.
- If the button with LED is pressed with the
KEY LED Off, LED comes on but goes off after
5 seconds later.
● ●
Fan enable
- This item toggles Fan Operation Control ON/
OFF.
- When the internal temperature of the
monitor is over 55℃, Fan starts to run.
● ●
Firmware Version
- Displays current firmware version.
● ●
Serial Number
- Displays the serial number of the monitor.
5. Menu Operations
[7] Display & Set